Oracle SG-SAS6-INT-Z Installation Manual Download Page 55

Page: 55 / 80

Installing the Windows Server Driver and Firmware

http://www.lsi.com/sep/Pages/oracle/index.aspx

Installing the Windows Server Driver and Firmware

Consult the Oracle hardware platform document to determine which Windows releases are

supported on your specific host platform.

The Windows Server driver required to run the HBA is available for download at:

http://www.lsi.com/sep/Pages/oracle/index.aspx

To Install the Windows Driver

Log in to the host.

In a browser, go to

http://www.lsi.com/sep/Pages/oracle/index.aspx

Select the type and then model of the HBA that you want (SG(X)-SAS6-INT-Z).

Select and download the specific Windows driver that is supported by the

Windows release on your hardware platform.

Select and download the corresponding Readme file for the Windows driver, and

follow the instructions in the Readme file to complete the driver installation.

Firmware Updates

The Windows firmware and boot code update for the HBA, along with any accompanying

documentation, are available for download at

http://www.lsi.com/sep/Pages/oracle/index.aspx

Installing the VMware Driver and Firmware

The HBA driver is included as part of the VMware ESX Server installation. The VMware ESX

Server installation requires nothing from the user.

Chapter 4 • HBA Software Installation

Summary of Contents for SG-SAS6-INT-Z

















































































Search results

Summary of Contents for SG-SAS6-INT-Z

Reviews:

Related manuals for SG-SAS6-INT-Z

Brands by name

Popular brands

Oracle SG-SAS6-INT-Z, Installation Manual

Search results

Summary of Contents for SG-SAS6-INT-Z

Reviews:

Related manuals for SG-SAS6-INT-Z

Brands by name

Popular brands