Installing the CLI for Updating the BIOS and FCode
Installing the CLI for Updating the BIOS and FCode
If you need to update the fibre channel BIOS and FCode, you can do so by using the QLogic
SANsurfer command-line interface (CLI). Oracle recommends that you update to the latest
FCode when using this Converged Network Adapter.
If you have not done so already, you can download the SANsurfer FC HBA CLI and SANsurfer
Converged Network Adapter Networking CLI tools from the Oracle support area of the QLogic
web site at:
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/Oracle_Search.aspx
Follow the installation instructions in the
README.TXT
file. Installation instructions are also
available in the QLogic user's guides for those tools, which can be found on the QLogic web
http://www.qlogic.com/pages/default.aspx
For instructions on how to update the BIOS and FCode, see the
SANsurfer FC HBA CLI User's
Guide
and
SANsurfer Converged Network Adapter Networking CLI User's Guide
on the QLogic
web site.
Chapter 3 • Software Installation
61
Summary of Contents for SG-EMFCOE2-Q-SR
Page 2: ......
