Oracle Quad Port 10GBase-T User Manual Download Page 86

Page: 86 / 96

Analyze Slow Network Performance (Oracle Solaris)

Analyze Slow Network Performance (Oracle Solaris)

The adapter supports several driver parameters that affect the performance of the ports. See

“Driver Parameters (Oracle Solaris)” on page 57

for more information about the default values.

View the network performance.

truss -p

PID

Look for

NIS

DNS

, and network routing outages.

If you find any issues, fix them before proceeding.

View the I/O statistics to ensure that there are no bottlenecks on the disk.

iostat -xcn 5

If you discover a bottleneck, try setting logging to dump to the

/tmp

directory. Then, retest to

ensure that the new configuration improved performance.

Use the

vmstat

command and the

mpstat

command to check that none of these

conditions exist:

■

CPU is pegged.

■

CPU is receiving too many interrupts.

■

Memory is low.

■

Page faults are occurring.

■

Contention for resources causes too many spins on mutex (

smtx

If the performance issue points to the driver, try to profile the call stack for the

i40e

driver by

using the

DTrace

script. For more information about the

DTrace

script, go to

http://support.

oracle.com

Related Information

■

“Analyze Why the Device Link Is Missing (Oracle Solaris)” on page 84

■

“Recover From a Port Hang (Oracle Solaris)” on page 84

■

“Analyze Why the Link Is Not Up After Back-To-Back Cable Connection (Oracle

Solaris)” on page 87

■

“Analyze Why Changing the MTU Does Not Correctly Set the Link Property (Oracle

Solaris)” on page 87

Oracle Quad Port 10GBase-T Adapter User's Guide • June 2019

Summary of Contents for Quad Port 10GBase-T

































































































Search results

Summary of Contents for Quad Port 10GBase-T

Reviews:

Related manuals for Quad Port 10GBase-T

Brands by name

Popular brands

Oracle Quad Port 10GBase-T, User Manual

Search results

Summary of Contents for Quad Port 10GBase-T

Reviews:

Related manuals for Quad Port 10GBase-T

Brands by name

Popular brands