manualshive.com logo in svg

Oracle netra X5-2, Installation Manual

Share
Download
Oracle netra X5-2 Installation Manual Download Page 135

2.

Reboot the Oracle Communications Session Border Controller using the reboot
command.

The Oracle Communications Session Border Controller should now be successfully
running the new release.

HA Upgrade

In the descriptions and processes outlined below, ORACLE-1 is initially the active system and
ORACLE-2 is initially the standby system. Please read the following procedures carefully
before beginning the upgrade. If necessary, you can back out of the upgrade once during the
upgrade procedure and once after you have completed the upgrade procedure.

Note:

See the diagram below, which addresses how the HA Upgrade procedures'
sequence includes rebooting the standby system first to avoid service interruption.

Figure 12-1    Configure and Reboot Standby First for HA Procedures

ORACLE-1

Initial Active

ORACLE-2

Initial Standby

HA Upgrade procedure 

reboots Initial Standby first

HA Backout procedure assumes 

Initial Active has become Standby

HA Upgrade Procedure

This procedure upgrades HA deployments.

Note:

In the procedure below, ORACLE-1 is the active system and ORACLE-2 is the
standby system. The standby system should be rebooted first.

1.

Confirm that ORACLE-1 and ORACLE-2 start up and are synchronized.

Ensure that the running and current configurations on ORACLE-1 and ORACLE-2 have
the same number. In the following examples, all of the configuration versions are 5.

On ORACLE-1 and ORACLE-2, use the show health command to ensure all processes
are synchronized.

Chapter 12

HA Upgrade

12-7

Summary of Contents for netra X5-2

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands