Oracle Netra SPARC S7-2, Service Manual, Page: 149 / 258

Verify the PDB
■
“Secure the Drive Cage” on page 241
■
“Install the Fan Tray” on page 244
■
“Install a Fan Module” on page 155
Install all fan modules.
14. Complete these postrequisites in this order to finish the installation procedure.
See:
■
“Returning a Server to Operation” on page 235
■
“Verify the PDB” on page 149
Related Information
■
“Verify the PDB” on page 149
■
“Returning a Server to Operation” on page 235
Verify the PDB
After you install the PDB, you can verify its functionality.
1. Access Oracle ILOM.
See “Log In to Oracle ILOM (Service)” on page 26 .
2. Reset the PDB.
-> set /SYS/PDB clear_fault_action=true
Are you sure you want to clear /SYS/PDB (y/n)? y
Set 'clear_fault_action' to 'true'
->
3. Verify that the PDB is no longer faulty, then return to this procedure.
See “Determine if the PDB Is Faulty” on page 141 .
Related Information
■
“Install the PDB” on page 146
■
“Determine if the PDB Is Faulty” on page 141
Servicing the PDB 149