Oracle Netra SPARC S7-2, Service Manual, Page: 142 / 258

Determine if the PDB Is Faulty
1.
Check to see if any Server Service Required LEDs are lit or flashing.
See “Front Panel Components (Service)” on page 17 .
2.
In Oracle ILOM, check the health of the power system.
-> show /System/Power
/System/Power
Targets:
Properties:
health = OK
health_details = -
...
->
3.
Verify that the PDB is faulty.
For example, type:
-> show faulty
Target | Property | Value
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0 | fru | /SYS/PDB
...
->
■
If you see
/SYS/PDB
under the
Value
heading, the PDB is faulty.
■
If a FRU value different from
/SYS/PDB
is displayed, see “Component Service Task
Reference” on page 47 to identify which component is faulty.
4. Use the Oracle ILOM
faultmgmt
shell to identify the faulty component.
See “Identify Faulted Components” on page 27 .
Check the
Fault class
and
Description
fields for more information.
5. If the PDB is faulty, replace it.
See “Remove the PDB” on page 143 .
6. If you are unable to determine if the PDB is faulty, seek further information.
See “Detecting and Managing Faults” on page 25 .
Related Information
■
“Remove the PDB” on page 143
■
“Verify the PDB” on page 149
■
“Detecting and Managing Faults” on page 25
142 Netra SPARC S7-2 Server Service Manual • February 2017