Oracle Netra SPARC S7-2 Series, Administration Manual, Page: 30 / 90

Resetting the Server and SP
# ldm stop-domain
domain-name
. . .
#
ldm unbind
domain-name
c.
Stop and unbind any active I/O domains.
# ldm stop-domain
domain-name
. . .
#
ldm unbind
domain-name
d.
Verify that the nonprimary domains are inactive.
# ldm ls
3. Shut down the primary domain.
To shut down the OS, see “Shut Down the OS (
init
Command)” on page 36 or “Shut
Down the OS (
shutdown
Command)” on page 37 .
4. Switch from the system console prompt to the Oracle ILOM prompt.
{0} ok #.
->
5. From the Oracle ILOM prompt, type:
-> stop /System
Are you sure you want to stop /System (y/n)? y
Stopping /System
->
Note - To perform an immediate shutdown, use the
stop -force /System
command. Ensure
that all data is saved before typing this command.
Related Information
■
“Power On a Server With Multiple Active Domains (Oracle VM Server for
SPARC)” on page 28
Resetting the Server and SP
Use these topics to reset the server or SP.
30 SPARC and Netra SPARC S7-2 Series Servers Administration Guide • March 2017