Troubleshooting
35
Unmounting the Workstation 6
1.
Disconnect all cables from the I/O ports.
2.
Tilt the Workstation 6 Head back to angle the I/O ports up.
3.
Disconnect the DC power cable.
4.
If you secured the Workstation 6 to the adjustable stand using a security screw,
remove the security screw.
5.
Pull down the quick release pin and push the Workstation 6 Head lightly.
6.
Slide the Workstation 6 Head all the way back and then lift to unmount the
Workstation 6.
