Locating the Hex Key and Security Hex Bolts
The hex key and security hex bolts are necessary for several procedures when setting
up any configuration of the Workstation 6 Series.
1.
Place the Adjustable Stand on a flat surface.
2.
Remove the Adjustable Stand cover.
3.
Retrieve the spare 2.5mm hex key and the three M3x6 security hex bolts.
Securing the Adjustable Stand Cover
Securing the adjustable stand cover is a common procedure used when setting up any
configuration of the Workstation 6 Series.
1.
Place the Adjustable Stand on a flat surface.
2.
Locate and retrieve the hex key and security hex bolts.
3.
Use the front tabs and the edges to ensure the cover is properly aligned and firmly
closed.
Chapter 4
Locating the Hex Key and Security Hex Bolts
4-3
