
1
Oracle® MICROS Kiosk 110 Assembly Addendum
Introduction
This addendum provides important assembly information for the Oracle MICROS Kiosk 110.
Installation Notes
•
Assemble the kiosk in a dry, well-lit area with a level surface.
•
To assist with assembly, use a magnetic tip screwdriver.
•
The kiosk must be securely bolted to the floor to ensure safety.
•
References to Ingenico, i-Series devices, Star printers, and ELO workstations do not apply to this installation
scenario and can be ignored.
•
This release of the kiosk supports the Oracle MICROS Workstation 625/655 in landscape orientation and the Oracle
MICROS Express Station 400 in portrait orientation.
Oracle MICROS Kiosk 110 Boxes
Note that your installation may not include some optional components.
Core Components
Box Number
Oracle Part Number
Model / Description
***
Varies
Oracle MICROS Workstation 625/655
***
Varies
Oracle MICROS Express Station 4 Series
1*
7602031
Oracle MICROS Kiosk 110
*
Includes two interior boxes:
•
Box 1A
: stand top (
ELO-STAND-SELF-SERVICE-15-22-FLOOR-TOP
)
•
Box 1B
: stand base (
ELO-STAND-SELF-SERVICE-15-22-FLOOR-BASE
)
Electronic versions of ELO stand documentation can be downloaded from
the ELO website at
https://www.elotouch.com/accessories-wallaby-self-
2
7601142
External power supply for Oracle MICROS Workstation 6 Series
IMPORTANT:
•
Some steps/parts described in the original ELO assembly instructions do not apply and can
be ignored.
•
This addendum contains important information not included in the original assembly instructions.
•
Use this addendum as the primary overview for assembling the kiosk.
To simplify the instructions in this addendum, Kiosk 110 shipping boxes have been assigned
“virtual” box numbers. Refer to the table below for more information about box contents,
part numbers, etc.
ACTUAL SHIPPING BOXES ARE NOT MARKED AS BOX 1, BOX 1A, BOX 2, BOX 3,
ETC.