Legend
1 Power and activity indicator
2 Drive fault indicator
The following table provides status information on the drive LEDs.
Table 39: Drive Enclosure LED status and description (drives)
Status
Power/Activity Indicator
(green)
Drive Fault indicator
(amber)
Drive is installed
and operational.
On and blinking with startup
or activity
Off
The drive is located. On
Flash one second on and one
second off
A drive fault is
present.
On
On
In addition to the continuous
amber light on the Drive Fault
LED, the Locate LED on the
operator panel is also a
continuous amber light.
A failure occurred
in the power control
circuit.
Off
On
In addition to the continuous
amber light on the Drive Fault
LED, the Module Fault LED on
the operator panel is also a
continuous amber light.
A failure occurred
in the disk array.
On
Flash three seconds on and one
second off.
In addition to the flashing
amber light on the Drive Fault
LED, the Locate LED on the
operator panel is also a
continuous amber light.
Pilot LED Indicators
The Pilot LEDs are on the front panel of the Pilot. Use these diagnostic LEDs to
determine if a component has failed in the Pilot.
The following figure shows the LEDs at the front of the
Pilot:
Oracle FS System LED Status
256
