Oracle Fabric Interconnect F2-12, Installation Manual, Page: 91 / 118

1GBase-T Cable Status LEDs
Glyph Name Color State and Meaning
This indicator is an LED only, not a combination LED and button.
Attention Amber Indicates these conditions:
■ On – Fault detected.
■ Off – No faults detected.
OK Green Indicates these conditions:
■ On – Switch is functional without fault.
■
Off
– Switch is off or initializing.
Service
Processor
(SP)
Green Indicates these conditions:
■ On – SP is ready.
■ Slow blinking – SP is booting up.
■ Off – SP is powered off, resetting, or at fault.
Related Information
■
“Verify LED Status” on page 89
■
“Verify That the Switch Is Operational” on page 94
■
“Verify Connectivity” on page 96
■
“Log In to the Oracle Fabric Manager Interface” on page 106
■
“Log In to the Oracle Fabric OS Interface” on page 105
■
“Run the Oracle Fabric OS Configuration Wizard” on page 102
■
“Oracle Fabric OS Configuration Wizard Parameters” on page 104
1GBase-T Cable Status LEDs
The table shows the status of the 1GBase-T ports on the switch's port block above the power
plugs.
Glyph Name Color State and Meaning
LNK/ACT Link and
activity
Green Indicates these conditions:
■ On – Link is up.
■
Intermittent flash
– There is activity on the link.
■ Off – Link is down.
SPD Speed Green Indicates these conditions:
■ On – Link is at high speed.
■ Slow blinking – Link is at medium speed.
■
Off
– Link is at slow speed.
Verifying Functionality 91