Oracle Fabric Interconnect F2-12, Installation Manual, Page: 67 / 118

Connect the PrizmMT Cables
3.
Clean the receptacle:
a.
Remove the adapter from the end of the PrizmMT cleaner.
b.
Insert the cleaner tip into the receptacle.
c.
Pump the cleaner into the receptacle, advancing the cleaning cloth inside.
d.
Remove the cleaner from the receptacle and verify cleanliness.
e.
Replace the adapter onto the end of the PrizmMT cleaner.
4.
Remove the protective cap from the cable connector and visually inspect the
connector.
The connector should be clean and free of dirt or debris.
5.
Identify the cable-alignment features on the cable, such as the keying on the
cable connector and port, and the white dot on the housing.
See “Standard MT and PrizmMT Cable Precautions” on page 55 .
6.
Align the PrizmMT connector to where it will connect.
For the chassis, the receptacle is vertical, so the connector is correctly aligned when the white
dot on the housing is facing down.
Connecting Cables 67