Oracle Fabric Interconnect F2-12, Installation Manual, Page: 103 / 118

Run the Oracle Fabric OS Configuration Wizard
■
If you want to manually run the Oracle Fabric OS configuration wizard, at the
Oracle Fabric OS prompt, type:
[OFOS} system clear config
This is a destructive operation. Your configuration will be cleared and the
system will be restarted. Please type 'confirm' to clear the configuration and
restart the system.
>
confirm
Then log in to the Oracle Fabric OS again.
3. Review the parameters that the Oracle Fabric OS configuration wizard requests.
See “Oracle Fabric OS Configuration Wizard Parameters” on page 104 .
4. Permit the Oracle Fabric OS configuration wizard to run.
Type
Y
.
5. Answer the questions as the wizard requests.
When completed, the wizard reboots the Oracle Fabric OS.
6. Return to verifying the switch connectivity or log in to the Oracle Fabric OS or
Oracle Fabric Manager with the newly configured values.
See:
■
“Verify Connectivity” on page 96
■
“Log In to the Oracle Fabric OS Interface” on page 105
■
“Log In to the Oracle Fabric Manager Interface” on page 106
Related Information
■
“Verify LED Status” on page 89
■
“Verify That the Switch Is Operational” on page 94
■
“Verify Connectivity” on page 96
■
“Log In to the Oracle Fabric Manager Interface” on page 106
■
“Log In to the Oracle Fabric OS Interface” on page 105
■
“Oracle Fabric OS Configuration Wizard Parameters” on page 104
Verifying Functionality 103