Oracle Fabric Interconnect F1-15, User Manual

Page: 15 / 176

Site Preparation
■
Power: 100-127 / 200-240 VAC 8.5 A at 100 volts or 4 A at 180 volts 50 - 60 Hz 750 W
(maximum) with chassis fully loaded
Each power supply should be connected to a separate 15-20 A AC branch circuit. Do not
exceed the maximum power cord length of 15 feet (4.57 m).
Caution -
For the Oracle Fabric Interconnect F1-4 only, input power cords are used as the main
AC power disconnect. As a result, the facility power socket outlet shall be installed near the
equipment and shall be easily accessible.
■
Environmental: Operating Temperature 5-
35℃
Maximum Recommended Operating
Temperature (Ambient)
35℃
Relative Humidity (non-condensing) 10-80% at
35℃
Operating Altitude 2000m (maximum)
■
Cooling: The front and back of the chassis must be free of any obstruction to the airflow
(front-to-back)
Caution -
Air vents must not be blocked and must have free access to the room ambient air
for cooling. Installation of the equipment in a rack should be such that the amount of airflow
required for safe operation of the equipment is not compromised.
■
Rack Type: 4-post EIA rack
■
Client Servers: InfiniBand interface required
Select a location in the rack in which to install the Oracle Fabric Interconnect. The location
must accept a chassis with the following dimensions, as shown in Figure 2, “Verifying Rack
Space,” on page 16 :
■
Height: 3 1/2 inches (8.9 cm)
■
Weight: 45 lbs. (20.5 Kg) in shipping configuration (no I/O Modules installed) 53 lbs. with
I/O modules installed (the fully loaded weight might differ depending on the number and
type of modules installed.)
■
Width: 17-13/16 inches (45.4 cm)
■
Depth: 28-1/4 inches (71.8 cm)
■
Service Clearance: 18 inches (45.7 cm) (front and rear)
Installing the Fabric Interconnect 15