Oracle EXADATA X5-2 Service Manual Download Page 177

Page: 177 / 262

Setting Up BIOS Configuration Parameters

This section provides an overview of BIOS configuration management, Legacy BIOS, UEFI

BIOS, and the BIOS Setup Utility.

The following topics are discussed.

Description

Links

Learn about the tools available to manage the BIOS

configuration.

“Managing the BIOS Configuration” on page 177

Learn how to access the BIOS Setup Utility.

“Accessing the BIOS Setup Utility” on page 178

Learn about UEFI BIOS.

“Using UEFI” on page 183

Learn how BIOS allocates Option ROM and I/O

resources.

“Using BIOS for Resource Allocation” on page 186

Learn how to perform common BIOS setup

procedures.

“Common BIOS Setup Utility Tasks” on page 187

Related Information

■

“BIOS Setup Utility Menu Options” on page 203

Managing the BIOS Configuration

The BIOS configuration parameters on an Oracle x86 server are manageable from the BIOS

Setup Utility and Oracle ILOM. For information about using these tools to manage the BIOS

configuration, refer to:

■

Oracle ILOM

– “Maintaining x86 BIOS Configuration Parameters” in the

Oracle ILOM

Administrator's Guide for Configuration and Maintenance Firmware Release 3.2.x

in the

Oracle Integrated Lights Out Manager (ILOM) 3.2 Documentation Library at

http://www.

oracle.com/goto/ilom/docs

■

BIOS Setup Utility

–

“Common BIOS Setup Utility Tasks” on page 187

Setting Up BIOS Configuration Parameters

177

Summary of Contents for EXADATA X5-2







































































































































































































































































Search results

Summary of Contents for EXADATA X5-2

Reviews:

Oracle EXADATA X5-2, Service Manual, Page: 177 / 262

Search results

Summary of Contents for EXADATA X5-2

Reviews: