Oracle EXADATA X5-2, Service Manual, Page: 111 / 262

Install a Processor
d.
Reconnect the power cords to the power supplies, and power on the server.
See “Reconnect Power and Data Cables” on page 167 and “Power On the
Server” on page 167 . Verify that the AC OK LED is lit.
16.
Use Oracle ILOM to clear server processor faults.
Refer to the Oracle Integrated Lights Out Manager (ILOM) 3.2 Documentation Library for
more information about the following steps.
a. To show server faults, log in to the server as
root
using the Oracle ILOM CLI,
and type the following command to list all known faults on the server:
->
show /SP/faultmgmt
The server lists all known faults, for example:
-> show /SP/faultmgmt
Targets:
shell
0 (/SYS/MB/P0)
Properties:
Commands:
cd
show
Alternatively, to list all known faults in the server, log into the Oracle Solaris OS and issue
the
fmadm faulty
command, or log into the Oracle ILOM service processor from the
Oracle ILOM Fault Management Shell and issue the
fmadm faulty
command.
b. To clear the fault identified in Step 16a, type the following command:
->
set /SYS/MB/P0 clear_fault_action=true
For example:
-> set /SYS/MB/P0 clear_fault_action=true
Are you sure you want to clear /SYS/MB/P0 9y/n)? y
Set ???clear_fault_action” to ???true'
Alternatively, to clear all known faults in the server, log into the Oracle Solaris OS and
issue the
fmadm repair
command, or log into the Oracle ILOM service processor from the
Oracle ILOM Fault Management Shell and issue the
fmadm repair
command.
Servicing Components That Require Server Power-Off 111