manualshive.com logo in svg

Oracle EXADATA X5-2, Service Manual

The Oracle EXADATA X5-2 Installation Manual is an essential resource for effortlessly setting up this powerful product. Download the comprehensive manual for free from our website, enabling you to maximize the potential of your Oracle EXADATA X5-2 by following clear instructions and technical guidance.

Share
Download
background image

Monitoring Components and Identifying SNMP

Messages

This section includes information about monitoring components and identifying SNMP

messages for the Oracle Exadata Storage Server X5-2 High Capacity.

Description

Links

Review how Oracle ILOM monitors component health

and faults.

“Monitoring Component Health and Faults Using Oracle

ILOM” on page 229

Review information about system components and

nomenclature.

“Monitoring System Components” on page 230

Review SNMP traps generated by the server.

“Identifying SNMP Trap Messages” on page 241

Related Information

■

Oracle Integrated Lights Out Manager (ILOM) 3.2 Documentation Library at: 

http://www.

oracle.com/goto/ilom/docs

Monitoring Component Health and Faults Using Oracle

ILOM

The Oracle ILOM 3.2 interfaces provide easy-to-view information about the health status of

system components. From the Oracle ILOM web interface or in the Oracle ILOM command-

line interface (CLI), you can collect system-specific information about the server, determine the

health state of discrete components, and view any open problems on the server. Oracle ILOM

automatically detects system hardware faults and environmental conditions on the server. If a

problem occurs on the server, Oracle ILOM will automatically do the following:

■

Illuminate the Service Required status indicator (LED) on the server front and back panels.

■

Identify the faulted component in the Open Problems table.

■

Record system information about the faulted component or condition in the event log.

Monitoring Components and Identifying SNMP Messages

229

Summary of Contents for EXADATA X5-2







































































































































































































































































Reviews:

No comments

Related manuals for EXADATA X5-2

IBM TotalStorage DS300 Hardware Installation And User'S Manual preview
TotalStorage DS300
Brand: IBM Pages: 110
IBM System storage DS6000 Series Attachment Manual preview
System storage DS6000 Series
Brand: IBM Pages: 298
IBM System storage DS6000 Series Overview preview
System storage DS6000 Series
Brand: IBM Pages: 58
IBM Storwize V3500 Quick Installation Manual preview
Storwize V3500
Brand: IBM Pages: 78
IBM Power 720 Express 8202-E4B Installation Manual preview
Power 720 Express 8202-E4B
Brand: IBM Pages: 64
IBM PS700 Technical Overview And Introduction preview
PS700
Brand: IBM Pages: 148
IBM 5104-22C Manual preview
5104-22C
Brand: IBM Pages: 36
IBM AS/400e User Handbook Manual preview
AS/400e
Brand: IBM Pages: 834
iDirect Evolution X1 Installation Manual preview
Evolution X1
Brand: iDirect Pages: 130
Qsan XCubeNAS XN7012R Quick Installation Manual preview
XCubeNAS XN7012R
Brand: Qsan Pages: 16
QNAP QMiroPlus-201W Quick Installation Manual preview
QMiroPlus-201W
Brand: QNAP Pages: 20
FOR-A MFR-4000 Operation Manual preview
MFR-4000
Brand: FOR-A Pages: 72
AOpen 4-Port 10/100Mbps Ethernet Broadband Router User Manual preview
4-Port 10/100Mbps Ethernet Broadband Router
Brand: AOpen Pages: 41
Ubiquiti AmpliFi AFi-G Quick Start Manual preview
AmpliFi AFi-G
Brand: Ubiquiti Pages: 20
AMG Systems AMG9240-C User Manual preview
AMG9240-C
Brand: AMG Systems Pages: 2
TP-Link Archer VR500vd Installation Manual preview
Archer VR500vd
Brand: TP-Link Pages: 7
B&B Electronics Elinx ESW200 Series Quick Start Manual preview
Elinx ESW200 Series
Brand: B&B Electronics Pages: 20
Macpower & Tytech M9 - NDAS User Manual preview
M9 - NDAS
Brand: Macpower & Tytech Pages: 21

Brands by name

Popular brands

Load more brands