Oracle EXADATA X5-2 Page 213 Service Manual Download

Page: 213 / 262

BIOS Advanced Menu Selections

Setup Options

Options

Defaults

Description

control uses two wires to

send start/stop signals.

BIOS Advanced Menu Trusted Computing Options

The following table describes the BIOS Advanced Menu trusted computing options:

TABLE 25

BIOS Advanced Menu Trusted Computing Options

Setup Options

Options

Defaults

Description

TPM Support

Disabled/Enabled

Disabled

Enable or disable Trusted

Platform Module (TPM)

support. Only UEFI BIOS

implements this setup

option. If disabled, the OS

will not show TPM. Reset

of the platform is required.

TPM State

Disabled/Enabled

Disabled

Displays whether TPM

Support is enabled.

Note -

This option is

available only if TPM

Support is set to enabled.

Pending Operation

None/Enable Take

Ownership/Disable Take

Ownership/TPM Clear

None

Used to schedule an

operation for the security

device.

Note -

Your computer will

reboot during restart in

order to change the state of

a security device.

Current Status

Information

If TPM Support is

disabled, Current Status

Information displays

SUPPORT Turned OFF.”

TPM Enabled Status

Disabled/Enabled

Disabled

Use this option to provide

the current capability state

of the security device.

Note -

This option is

available only if TPM

Support is set to enabled.

TPM Active Status

Deactivated/Activated

Deactivated

Use this option to provide

the current capability state

of the security device.

BIOS Setup Utility Menu Options

213

Summary of Contents for EXADATA X5-2







































































































































































































































































Search results

Summary of Contents for EXADATA X5-2

Reviews:

Related manuals for EXADATA X5-2

Brands by name

Popular brands

Oracle EXADATA X5-2, Service Manual

Search results

Summary of Contents for EXADATA X5-2

Reviews:

Related manuals for EXADATA X5-2

Brands by name

Popular brands