manualshive.com logo in svg

Oracle EXADATA X5-2, Service Manual, Page: 19 / 262

Share
Download
Oracle EXADATA X5-2 Service Manual Download Page 19

About System Components

CRU

Description

Replacement Instructions

Disk backplanes

Provide power and communications connectors for

storage drives.

“Servicing the Storage Drive Backplanes” on page 112

SAS cables

Provide signals between the front disk backplane and

the Oracle Storage 12 Gb SAS PCIe RAID HBA,

and from the front disk backplane to the rear disk

backplane.

“Servicing SAS Cables” on page 118

Oracle Storage 12

Gb SAS PCIe RAID

HBA

Located in PCIe slot 6, the Sun Storage 12 Gb SAS

PCIe RAID HBA manages SAS storage drives.

“Servicing the Oracle Storage 12 Gb/s SAS PCIe RAID

HBA Card” on page 123

Front LED/USB

indicator modules

Contain the push-button circuitry and LEDs that are

displayed on the bezel of the chassis.

“Servicing the Front LED/USB Indicator

Modules” on page 130

Motherboard

assembly

Provides connectors for the DIMMs, processors, PCIe

risers, and other components.

“Servicing the Motherboard Assembly” on page 145

Related Information

■

“Illustrated Parts Breakdown” on page 16

■

“Servicing Components That Do Not Require Server Power-Off” on page 61

■

“Servicing Components That Require Server Power-Off” on page 77

About the Oracle Exadata Storage Server X5-2 High Capacity

19

Summary of Contents for EXADATA X5-2







































































































































































































































































Reviews:

No comments