manualshive.com logo in svg

Oracle EXADATA X5-2, Service Manual, Page: 158 / 262

Share
Download
Oracle EXADATA X5-2 Service Manual Download Page 158

Install the Motherboard Assembly

See 

“Servicing the Storage Drive Backplanes” on page 112

.

8.

Reconnect the server intrusion switch cable to the motherboard [6].

9.

Reinstall the following components:

Caution - 

When reinstalling power supplies, it is important to reinstall them into the slots from

which they were removed during the motherboard removal procedure; otherwise, the server key

identity properties (KIP) data might be lost. When a server requires service, the KIP is used by

Oracle to verify that the warranty on the server has not expired. For more information on KIP,

see 

“FRU Key Identity Properties (KIP) Automated Update” on page 49

.

■

Power supplies
See 

“Install a Power Supply” on page 75

.

■

PCIe cards
See 

“Install a PCIe Card” on page 90

.

■

SAS storage drive cables
See 

“Install SAS Storage Drive Cables” on page 121

.

■

Fan modules
See 

“Install a Fan Module” on page 70

.

10.

Install the air baffle.

Install the air baffle by placing it into the server and lowering it to its installed position.

11.

Install the Oracle Storage 12 Gb/s SAS PCIe RAID HBA card and its associated

super capacitor.

See 

“Install the Oracle Storage 12 Gb/s SAS PCIe RAID HBA Card” on page 127

.

12.

Return the server to operation.

a.   

Install the server top cover.

See 

“Install the Server Top Cover” on page 161

.

b.   

Return the server to the normal rack position.

See 

“Return the Server to the Normal Rack Position” on page 165

.

c.   

Reconnect the power cords to the power supplies, and power on the server.

See 

“Reconnect Power and Data Cables” on page 167

 and 

“Power On the

Server” on page 167

. Verify that the AC OK LED is lit.

158

Oracle Exadata Storage Server X5-2 High Capacity Service Manual • January 2018

Summary of Contents for EXADATA X5-2







































































































































































































































































Reviews:

No comments