manualshive.com logo in svg

Oracle EXADATA X5-2, Service Manual, Page: 112 / 262

Share
Download
Oracle EXADATA X5-2 Service Manual Download Page 112

Servicing the Storage Drive Backplanes

Related Information

■

“Remove a Processor” on page 100

Servicing the Storage Drive Backplanes

To remove and install the storage drive backplanes, follow the procedures in these sections.

Caution - 

Ensure that all power is removed from the server before removing or installing

the storage drive backplane. You must disconnect the power cables before performing this

procedure.

■

“Remove the Storage Drive Backplane” on page 112

■

“Install the Storage Drive Backplane” on page 116

Related Information

■

“Servicing Storage Drives and Rear Drives” on page 61

■

“Servicing SAS Cables” on page 118

Remove the Storage Drive Backplane

1.

Prepare the server for service.

a.   

Power off the server and disconnect the power cords from the power

supplies.

See 

“Powering Down the Server” on page 51

.

b.   

Extend the server into the maintenance position.

See 

“Extend the Server to the Maintenance Position” on page 55

.

c.   

Attach an antistatic wrist strap to your wrist, and then to a metal area on the

chassis.

See 

“Take Antistatic Measures” on page 57

.

112

Oracle Exadata Storage Server X5-2 High Capacity Service Manual • January 2018

Summary of Contents for EXADATA X5-2







































































































































































































































































Reviews:

No comments