Oracle Exadata Storage Server X7-2 EF, Installation Manual

Page: 38 / 90

Rackmounting the Server
Call Out Description
1 Slide-rails
2 Mounting brackets
3 Four M4 x 5 fine-pitch mounting bracket securing screws (not used)
4 Rackmounting Template
Related Information
■
“Rack Compatibility” on page 36
Rackmounting the Server
To rackmount the server, stabilize the rack, and install the slide rails and mounting brackets.
Then, install the server into the rack.
Stabilize the Rack
Caution - To reduce the risk of personal injury, stabilize the rack cabinet, and extend the anti-tilt
bar before you install the server.
Refer to your rack documentation for detailed instructions for the following steps.
1. Open and remove the front and back doors from the rack cabinet, only if they
impinge on the mounting bay.
2. To prevent the rack cabinet from tipping during the installation, fully extend the
rack cabinet anti-tilt bar, which is located at the bottom front of the rack cabinet.
3. If the rack includes leveling feet beneath the rack cabinet to prevent it from
rolling, extend these leveling feet fully downward to the floor.
Caution -
When moving the rack to a new location, including repacking, verify that the leveling
feet are up before moving the rack.
Related Information
■
“Safety Precautions” on page 34
38 Oracle Exadata Storage Server X7-2 EF and HC Installation Guide • November 2018