Oracle Dual Port 25 Gb, User Manual

Page: 47 / 88

Install RoCE in Windows User Mode
You can go to the adapter's Advanced Properties page and set Network Direct Functionality to
Enabled for each BCM5741X miniport.
You can also run this command in the PowerShell window:
Set-NetAdapterAdvancedProperty -RegistryKeyword *NetworkDirect -RegistryValue 1
3. Verify that RDMA is enabled.
These PowerShell commands return
true
if Network Direct is enabled.
a. Get-NetOffLoadGlobalSetting
b. Get-NetAdapterRDMA
Install RoCE in Windows User Mode
RoCE functionality is available in user mode and kernel mode application. Perform this
procedure before you run a user mode application that writes to NDSPI.
1.
Copy the
bxndspi.dll
user mode driver file to the
C:\Windows\System32
directory.
2. Install the driver.
rundll32.exe .\bxndspi.dll,Config install|more
Install RoCE in VMware ESXi
Before You Begin
You must have at least ESXi-6.5.0 GA build 4564106 installed before you perform this
procedure.
You must also have at least ESX6.5 L2 driver version 20.6.9.0 (RoCE supported L2 driver)
installed.
1. Ensure that the BNXTNET L2 driver is installed with the
disable_roce=0
module
parameter.
If the driver is not already installed with the parameter, set the module parameter:
# esxcfg-module -s "disable_roce=0" bnxtnet
2.
Copy the
bnxtroce
-
driver version
.vib
file in the
/var/log/vmware
directory.
Configuring the Network 47