manualshive.com logo in svg

Oracle DE2-24, Customer Service Manual

Share
Download
Oracle DE2-24 Customer Service Manual Download Page 253

How to Replace a Disk Shelf Power Supply

9.

Press the drive lever closed until it locks in place. If a vertically oriented drive is

higher than surrounding drives, push down on the top of the drive to properly

seat it. The Activity LED will be steady green to indicate a ready state.

10.

Go to the Maintenance > Hardware section of the BUI, click the right-arrow icon

 at the beginning of the appropriate disk shelf row, and then click Disk to

verify that the disk online icon   is green for the newly installed disk.

How to Replace a Disk Shelf Power Supply

Caution - 

Do not remove a component if you do not have an immediate replacement. The disk

shelf must not be operated without all components in place, including filler panels. Refer to

“Disk Shelf Hardware Overview” on page 234

 for component locations.

Disk shelves are provided with redundant power supplies to prevent loss of service due to

component failure. Each power supply is accompanied by one or more chassis cooling fans in

one customer-replaceable unit (CRU). Power supplies are hot-swappable, meaning they can be

replaced one at a time without removing power from the disk shelf. The modules can produce

a high-energy hazard and should only be replaced by instructed individuals with authorized

access to the equipment.

1.

Separate indicator LEDs on the back panel (see 

“Disk Shelf Back

Panel” on page 240

) represent the operational state of power supplies and fans

individually; see the rear panel illustration for details. Failed components are

indicated by amber LEDs as well as amber icons in the administrative BUI. Go to
the Maintenance > Hardware section of the BUI, click the right-arrow icon   at

the beginning of the appropriate disk shelf row, then select PSU or Fan to view
details on the respective components. You can also click the locator icon 

 to

flash the chassis locator LED.

2.

Locate the chassis and module containing the failed component.

3.

Ensure the power supply on/off switch is in the "O" off position.

4.

Disconnect the power cord tie strap from the power cord, and unplug the power

cord from the power supply.

5.

Release the lever/ejection arms.

Oracle Storage Drive Enclosure DE2-24P or DE2-24C:

Servicing the Hardware

253

Summary of Contents for DE2-24

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands