Changing Oracle ILOM Password from the Console
1.
In the Oracle ILOM console, from the Administration menu, select User
Management, and then navigate to the User Accounts subtab.
2.
Select root user and click Edit.
3.
Change the
root
user password.
Changing Oracle ILOM Password Using CLI Commands
1.
Connect to the Oracle ILOM console through SSH:
# ssh -l root SP-ipaddr
2.
Set the new password:
# set /SP/users/root password=new_password
Changing password for user /SP/users/root/password...
Enter new password again: *********
New password was successfully set for user /SP/users/root
Changing Oracle Database Appliance Passwords
After deploying your appliance, ensure that you change the following passwords for
securing your system.
Changing the Oracle Installation Owner Passwords
During deployment, the root and database users SYS, SYSTEM and PDBADMIN are
set to the system password. After deployment, the oracle and grid passwords are also
set to the system password. Change the passwords to comply with your enterprise
user security protocols. Refer to the Oracle Database Appliance Security Guide and
Oracle Database Security Guide for information about the required configuration and
best practices to secure database systems.
Changing the oda-admin User Password through the Command-Line
1.
Log in to the appliance as
root
.
2.
Run the
odacli-adm set-credential
command to reset the password. Enter the
new password when prompted.
# odacli-adm set-credential --password --username oda-admin
Agent password: new password
Changing the the oda-admin User Password through the Web Console
1.
Log into the Web Console using the user name
oda-admin
.
2.
Click About, then User Settings in the upper right corner of the Web Console.
3.
Enter the password in the Password field and the Password Confirmation field,
then click Submit.
A confirmation message is displayed.
Chapter 6
Changing Oracle Database Appliance Passwords
6-2
Summary of Contents for Database Appliance X6-2-HA
Page 15: ...Index xv...
