For example, the command
odaadmcli show power
shows information specifically
about the Oracle Database Appliance power supply:
# odaadmcli show power
NAME HEALTH HEALTH_DETAILS PART_NO. SERIAL_NO.
Power_Supply_0 OK - 7079395 1514CE056G
(Continued)
LOCATION INPUT_POWER OUTPUT_POWER INLET_TEMP EXHAUST_TEMP
PS0 Present 112 watts 28.000 degree C 34.938 degree C
Virtualized Platform
You can see the list of monitored components by running the command
oakcli
show -h
To see information about specific components, use the command syntax
oakcli show
component
, where
component
is the hardware component that you want to query. For
example, the command
oakcli show power
shows information specifically about
the Oracle Database Appliance power supply:
# oakcli show power
NAME HEALTH HEALTH DETAILS PART_NO. SERIAL_NO.
Power Supply_0 OK - 7047410 1242CE0020
Power Supply_1 OK - 7047410 1242CE004J
(Continued)
LOCATION INPUT POWER OUTPUT POWER INLET TEMP EXHAUST TEMP
PS0 Present 88 watts 31.250 degree C 34.188 degree C
PS1 Present 66 watts 31.250 degree C 34.188 degree C
Note:
Oracle Database Appliance Server Hardware Monitoring Tool is enabled
during initial startup of ODA_BASE on Oracle Database Appliance
Virtualized Platform. When it starts, the tool collects base statistics for about
5 minutes. During this time, the tool displays the message "Gathering
Statistics…" message.
Preparing Log Files for Oracle Support Services
If necessary, use the command
odaadmcli manage diagcollect
to collect
diagnostic files to send to Oracle Support Services.
Use the Bill Of Materials report saved in the
/opt/oracle/dcs/Inventory/
directory,
to enable Oracle Support to help troubleshoot errors, if necessary.
Chapter 15
Preparing Log Files for Oracle Support Services
15-12
Summary of Contents for Database Appliance X6-2-HA
Page 15: ...Index xv...
