Example 14-10 Viewing the Log File
The command
oakcli deploy
creates a log file that is prepended with the character
string
STEP*
. The log file is stored in the following location:
/opt/oracle/oak/onecmd/tmp/
oakcli expand storage
Use the
oakcli expand storage
command to configure the solid-state drives (SSDs)
for data storage into the existing base configuration to fully populate the base storage
shelf.
File Path
$ORACLE_HOME/opt/oracle/oak/bin/oakcli
Syntax
oakcli expand storage [-h]
Parameters
Parameter
Description
-h
(Optional) Display help for using the
command.
Usage Notes
After all disks are inserted into the slots, execute the
oakcli expand storage
command on both nodes. First on the master node and then wait for 30 seconds and
execute from the slave nodes. It takes about 10 to 12 minutes to add all of the disks.
Review the procedure for how to add the storage shelf for detailed steps on how to
add the disks, the timing needed to avoid flooding disk events, and the steps to
validate that all disks are online and are in a good state.
Example 14-11 Expanding Storage
#oakcli expand storage
Precheck passed.
Successfully formatted 1.6TB SSD disks...
Check the progress of expansion of storage by executing 'oakcli show disk'
Waiting for expansion to finish ...
Related Topics
•
Preparing for Storage Expansion
Review and perform these best practices before adding storage to the base shelf
or adding the expansion shelf.
•
Add the 10-pack solid-state drives (SSDs) for data storage into the existing base
configuration to fully populate the base storage shelf.
Chapter 14
oakcli expand storage
14-26
Summary of Contents for Database Appliance X6-2-HA
Page 15: ...Index xv...
