Oracle Database Appliance X3-2, Service Manual

Page: 100 / 188

Install Processor (CPU)
100 Oracle Database Appliance Service Manual • February 2016
Caution -
Equipment overheating. Whenever you remove a heatsink, you should replace it
or install a CPU filler before you return the server to operation; otherwise, the system might
overheat due to improper airflow.
Install Processor (CPU)
1. Attach an antistatic wrist strap.
See “Performing Electrostatic Discharge and Antistatic Prevention Measures” on page 34 .
2. Unpack the replacement CPU.
The CPU replacement kit includes a new CPU, wipes, and a tube of thermal grease.
3. Install the CPU.
a. Grasp the sides of the CPU firmly with your thumb and index finger, tilt it at
a 45 degree angle, orient it with the socket alignment tabs [2], carefully lower
the end of the CPU with the alignment tabs into the socket [3], support the