A-4
Oracle Telecommunications Billing Integrator Implementation Guide
•
aq_bridge_username: The username to connect to the Spoke DB.
•
encrypted_aq_bridge_password: The encrypted password of the
aq_bridge_username. To encrypt a password, use the
OAI_HOME/oai/9.0.4/bin/encrypt utility from the console. This utility generates
cipher text and prints it on the console, which can be copied to the adapter.ini
file.
•
aq_bridge_owner: The name of the schema to which the AQs in the spoke
database belongs. This value should be set to a valid schema name before the
adapter is started.
4.
Optionally, you can configure the following parameters to improve the
performance of the adapter:
•
agent_pipeline_to_hub = false
•
agent_pipeline_from_hub = false
•
agent_log_level = 0
5.
Copy the DTDs from APPL_TOP at the following location: $XNB_TOP/xml/oag72,
and place them in the home folder of the adapter on the host file system, i.e.
<OAI_HOME>/oai/9.0.4/adapters/<ADAPTER_NAME>. The AQ Adapter requires
the DTDs of the XML messages that it reads and writes into the AQs.
6.
To start an adapter service, run the following script from the console:
<OAI_HOME>/oai/9.0.4/adapters/<ADAPTER_NAME>/start
7.
To stop an adapter service, run the following script from the console:
<OAI_HOME>/oai/9.0.4/adapters/<ADAPTER_NAME>/stop
Note:
The following file contains the log of adapter activities:
<OAI_HOME>/oai/9.0.4/adapters/<ADAPTER_NAME>/logs/<latest_ti
mestamp>/oailog.txt
Dropping the Hub Schema
To drop the hub schema, you must stop the adapters and the repository service. The
steps are:
1.
Run the following script from the console to stop the adapters:
<OAI_HOME>/oai/9.0.4/adapters/<ADAPTER_NAME>/stop
