Oracle Acme Packet 6100, Hardware Installation Manual

Page: 34 / 114

26 Acme Packet 6100 Hardware Installation Guide
• Screen 4 — SNMP information: number of SNMP packets received,
number of SNMP traps sent out:
SNMP:
PKTs in :20
TRAPs out :10
To use the ACTIVITY menu in the graphic display:
1. From the top menu of the graphic display, press the Enter button.
2. Press the Up or Down button to scroll to the ACTIVITY selection.
3. Press the Enter button. The first screen in the ACTIVITY menu is
displayed.
4. Press the Up or Down button to scroll through the three ACTIVITY
screens. You can press the Enter button on any of the screen to update the
display with the most recent statistics.
5. Press the Up or Down button to scroll to the RETURN selection.
6. Press the Enter button to return to the Top Menu.
ENVIRONMENT
Menu
The ENVIRONMENT menu allows you to view information about the
hardware’s operational status. The graphic display presents the following
information in the order listed:
• Screen 1 — Hardware alarms and Link Alarms:
HW ALARM : 0
LINK ALARM : 2
•
Screen 2 — System temperature and fan speeds:
TEMPERATURE: 38.00 C
FAN SPEEDS:
100% 100% 100% 100%
• Screen 3 — System voltages:
VOLTAGES (V):
1.099, 1.186
1.488, 1.790
2.458, 3.278, 4.982
To use the ENVIRONMENT menu in the graphic display:
1. From the top menu of the graphic display, press the Enter button.
2. Press the Up or Down buttons to scroll to the ENVIRONMENT selection.
3. Press the Enter button. The ENVIRONMENT information is displayed.
4. Press the Up or Down button to scroll to the RETURN selection.
5. Press the Enter button to return to the Top Menu.
RETURN
Pressing the Enter button for the RETURN selection returns you to the base
display during normal operating conditions or to the alarm display during an
alarm condition.