Oracle Acme Packet 6100, Hardware Installation Manual

Page: 11 / 114

Acme Packet 6100 Hardware Installation Guide 3
the proper protective devices (such as an ESD wrist strap) when handling any
and all Acme Packet 6100 hardware and while performing any Acme Packet
6100 hardware procedures.
Precautions
To protect your equipment from ESD, follow these ESD safety precautions:
• Ensure that the Acme Packet 6100 is properly grounded.
•
If you are grounding your Acme Packet 6100 to an electrically conductive,
grounded rack, check to see whether or not the rack is painted. Paint can
hinder proper grounding. If your equipment rack is painted, you should
ground the system to some other reliable place or remove a small portion
of paint for proper grounding.
• Use a grounded ESD wrist strap when working on the Acme Packet 6100
to prevent static discharge.
• To avoid damaging ESD sensitive hardware, discharge all static electricity
from your body before working directly with the Acme Packet 6100 chassis
by touching a grounded object.
Figure 1 - 1. ESD Strap
Environmental, Safety, and Regulatory Certifications
For specific information regarding the environmental, safety, and regulatory
certifications applicable to the Acme Packet 6100 list of specifications.