Removing and Replacing the Solid State Drive
Note:
Before handling the Solid State Drive, ground yourself using an ESD wrist
strap or other comparable grounding system. Failure to do so could damage
the Solid State Drive or the Acme Packet 4600.
Identifying the Solid State Drive
Once the Acme Packet 4600 is open, replacement is straightforward. The Solid State
Drive (SSD) attaches electrically to the Acme Packet 4600 motherboard by a standard
2.5” SATA connector. In addition, it is secured to the motherboard by four screws.
The SSD is located at the front of the motherboard, on the left side as you view it from
the rear of the chassis. The SSD has brackets on each side, with four screws
attaching it to the motherboard.
Chapter 6
Upgrading or Replacing a Solid State Drive
6-23