Phillips screws and a flat
head screw
Center mounting flanges (2) for a 2-post rack
Cabinet-style 4-Post Chassis Installation
The following sections explain how to mount the Acme Packet 4600 in a cabinet-style,
4-post equipment rack.
Mounting System
Acme Packet provides flexible mounting options for your Acme Packet 4600
equipment rack installation.
The mounting system consists of a slide rail mounted on each side of an equipment
rack and a chassis slide rail mounted on each side of the Acme Packet 4600 chassis.
Once the slide rails are installed on the equipment rack and chassis, the chassis
can be slid into place by aligning the installed chassis slide rails along the guides on
the equipment rack slide rails. When the Acme Packet 4600 is fully inserted into the
equipment rack, it is secured in place with two captive thumbscrews.
Installing the Equipment Rack Slide Rails
In the first stage of system installation, secure the equipment rack slide rail to the
equipment rack. The painted end of the equipment rack slide rail attaches to the front
of the equipment rack and the bare steel side attaches to the rear of the equipment
Chapter 4
Cabinet-style 4-Post Chassis Installation
4-5