Oracle Acme Packet 4500, Hardware Installation And Maintenance Manual

Page: 103 / 114

Acme Packet 4500 Hardware Installation and Maintenance Guide 97
7 Specifications
Introduction
This chapter provides information regarding the physical, electrical, environmental,
and connector specifications of the Acme Packet 4500.
Safety and Regulatory Certifications
For information regarding safety and regulatory certifications applicable to the Acme
Packet 4500, refer to the
Acme Packet Platforms Safety and Compliance Guide in
addition to this document.
Physical Specifications
Acme Packet 4500
Chassis
Specifications
This table lists the physical dimensions and weight of the Acme Packet 4500.
Table 7 - 18. Chassis Physical Dimensions and Weight
Specification Description
Height 1.72” (4.37 cm) (1U)
Width 17.10” (43.43 cm) (+ mounting ear width: 19” (48.26 cm))
Depth 19” (48.26 cm) (+ mounting slide bar depth)
Weight approximately 19 lbs (8.62 kg), fully loaded
AC Power Supply
Physical
Dimensions
This table lists the physical dimensions and weight of the Acme Packet 4500 AC
power supply.
Table 7 - 19. AC Power Supply Physical Dimensions
Specification Description
Height 1.594” (4.05 cm)
Width 4” (10.16 cm)
Depth 8.50” (21.59 cm)
Weight 2lbs., 2 oz. (0.96 kg)
Important: This equipment is intended for installation in locations where National
Electrical Code (NEC) applies.