Opzoon Technology Co.,Ltd.All rights reserved.400-706-8366
www.opzoon.com
Manual
Outlook
Microphone
Power
switch
OFR-T1-S
Installation Guide
1. Remove the base bracket inside the gate cover. Install the locating
adaptor on the base bracket, and then replace the base bracket to the
original position.
Locating adaptor
Base bracket
Base fixing screws
Base fixing screws
4. Connect cables to the interface module, and then cover the gate cover.
Device locating screws
Cover hole
3. Install the interface module to the reserved mounting location under
the gate cover.
ID card interface
Positive power
Negative power
Interface module
Product Specification
Product model
OFR-T1-S
Facial anti-counterfeit
Recognition distance
Recognition mode
Ambient light range
Support
60 ~ 90 cm
1 : N , 1 : 1 , 1:1 / 1:N
0 ~ 800LUX(Camera lens should be avoided from the
direct sunlight)
Processor
Memory
Flash
Camera
Display
Ambient temperature
Power
Dimenstion
2.1GHz quad-cord CPU plus 192-cord GPU
2GB DDR3 RAM
16GB（scalable）
Dedicated binocular camera (visiable light and near-infarad lens)
8.0" IPS LCD touch screen
0℃ ~ 45℃
12V 4.16A Max
148 x 123 x 351 mm (L x W x H)
WI
FI
Bluetooth
Wiegand output
Relay
Netword port
USB
OTG
Debug
DC
Support
Support
1，W_OD0/W_OD1/GND
1，R_ON/R_COM/R_OFF
1
2
1
1
1
12V DC
12V DC-K1
port
16PIN-K1
port
Debug
RJ45
R_OFF
R_COM
R_ON
GND
W_OD1
W_OD0
USB-K1
USB
USB
OTG
OTG-K1
2. Install the device on the locating adaptor; fasten screws after
adjusting the horizontal angle. Remove the cover from the device holder
to adjust angle, then release elevation locking screws; fasten screws
while completing angle adjustment.
Elevation locking
screws
Cover