OPW M2010-EU, Installation Manual

Page: 60 / 149

Section 9 Sensor Support
As of Release 3 the SiteSentinel
®
Nano
®
system supports OPW-FMS Smart Sensors that use IntelliSense
™
Technology. The OPW smart sensors can monitor all contained areas of the fuel-storage system: tank
interstice, piping sumps, STP containment sumps, dispenser sumps and pans, monitoring wells and site
locations. Sensors connected to the I.S. barrier are automatically detected and identified by the console.
9.1 IntelliSense
™
Technology
This technology lets the Nano's internal I.S. barrier automatically find the sensor's connection, type and
status. IntelliSense will minimize user entry errors and identify hardware issues with minimal troubleshooting.
9.2 Mixed Multi-Drop Installation
The Nano's Mixed Multi-Drop technology can run probes and sensors on one cable back to the tank
gauge. See "Nano Mixed Multi-drop Installation" on page 43 for more information.
IMPORTANT:
Seal packs and weatherproof junction boxes are REQUIRED with ALL I.S.
field connections.
9.3 Smart Sensors for Nano
Part Number Description
30-0232-DH-10 Discriminating Dispenser Sump Sensor
30-0232-DH-20 Discriminating STP Sump Sensor
30-0236-LW Discriminating Interstitial Sensor (Optical)
30-0234-HW-06/15/20 Hydrocarbon Liquid Sensor with water indicator (6, 15 and 24 ft. lengths)
30-0234-HW-01 Interstitial Hydrocarbon Liquid with water indicator
30-0231-S Interstitial Sensor-Float Switch – (Small Plastic)
30-0231-L Sump Sensor-Float Switch – (Large Plastic)
Doc. No.: M2010-EU Rev.: 13
Page 60 of 149