OPW M00-051.00 FSC3000, Command-Line Configuration Manual

Page: 86 / 181

13.2 Set Quantity Restriction
The Set Quantity Restriction table is where code limits are defined either by currency or volume that can
be assigned to a card and/or account. This restriction limits each transaction to the amount assigned to the
code. This table can only support all codes as currency or volume limits, but not both. Code 0 is always
unrestricted.
(Option 2) – Card Management options
Card/Account buffer – The "Quantity Restriction" option must be enabled in order to use this setup option.
To set Quantity Restriction Table type:
Set Quantity Restriction <ENTER>
QUANTITY RESTRICTION CODES:(values represent quantities)
Code 0 No Restrictions
Code 1 20
Code 2 40
Code 3 60
Code 4 80
Code 5 100
Code 6 120
Code 7 140
Code 8 160
Code 9 180
Code 10 200
Code 11 220
Code 12 240
Code 13 260
Code 14 280
Code 15 300
Qty restriction value options (Y/N)? N
Doc. No.: M00-051.00 Rev.: 10
Page 86 of 181