OPW M00-051.00 FSC3000, Command-Line Configuration Manual

Page: 67 / 181

The resolution of the customizable picture depends on the FIT500's display resolution. TheFIT500
™
currently supports bitmap images of 640 pixels in width by 480 pixels in height (VGA size). Larger images are
acceptable but will be reduced to the above size when displayed.
8.5 Additional Prompts
The FSC3000
™
controller can support Additional Prompts. These additional prompts were originally
designed for Network Cards, but can also be used for Proprietary Cards. The additional prompts allow you
the ability, just like the other prompts, to change the message. In addition, there is also the option to restrict
the number and type of input. The input can be alphanumeric, numeric, alpha numeric (hidden) or yes/no. If
dual language is enabled, different messages for language 1 & 2 can be set up Up to eight (8) additional
prompts can be assigned to each card/account type, but only nine (9) can be combined presented for a
single transaction with the order of precedence being
Account Prompts
,
Driver/Single
and then
Vehicle
.
EXAMPLE:
The cards Account is configured for 4 prompts, the Driver card with 4 and Vehicle with 4.
When prompted, the 4 account prompts will be presented, the 4 driver card prompt and only
the first vehicle card prompt.
NOTE:
If using Network Cards, on the system do not modify the prompts used by the specific
networks. In addition, some prompts may need to be changed for a specific network.
Reference the following page as needed.
To format additional prompts:
Set Prompt <ENTER>.
Doc. No.: M00-051.00 Rev.: 10
Page 67 of 181