OPW M00-051.00 FSC3000, Command-Line Configuration Manual

Page: 46 / 181

Enter Tank #: 1 (Enter Tank number – not required for proper operation)
Clear Pump Totals (Y/N)? N
Enter Totalizer Value: 0.0 (Should set to match fueling point totalizer)
Set Up Hose 2 (Y/N)? N (Only required if pump has more than 1 grade!)
Set Up Hose 3 (Y/N)? N (Must match the pump mapping)
Set Up Hose 4 (Y/N)? N
Set Up Hose 5 (Y/N)? N
Set Up Hose 6 (Y/N)? N
Set Up Hose 7 (Y/N)? N
Set Up Hose 8 (Y/N)? N
Repeat process to configure each position for each fueling point.
6.4.4 Install PCT # POS # (# = PCT 1 to 4 and POS 1 to 8)
The
Install PCT # POS #
command indicates to the system that a PCT position will be used.
Install PCT # POS # (Repeat process to install each configured position)
6.4.5 Install PCT # (# = 1 to 4)
This
Install PCT #
command indicates to the system that the PCT is there and to communicate with it.
Install PCT # (Repeat process to install each configured PCT)
Doc. No.: M00-051.00 Rev.: 10
Page 46 of 181