Opvimus ME-200C, Operating Instructions Manual

Page: 10 / 33

MD-30C version 3.2.000
9
Microphone desk and
voice alarm fireman's panel
ME-200C
5.2.1. CAN Bus and audio connection between ME-200C and COMPACT unit
Figure 5 shows the most common connection
between an ME-200C and the COMPACT audio
matrix with the UMX-EA3 input card. To facilitate
the connection it is recommended to use an
Optimus Z-52A patch panel or similar.
5.2.2. CAN Bus and audio connection between several ME-200C
Use the INPUT and OUTPUT connectors to connect
various (up to a maximum of 16), forming a BUS
between elements.
Figure 5
Figure 6
CAN End
termination = ON
CAN End
termination =
OFF
CAN End
termination = OFF
(RJ45 Connector
front view)
To UMX-EA3 card
To COMPACT unit
From RJ45 OUTPUT
ME-200C
(RJ45 Connector
front view)
(N
ot
co
nn
ect
ed
)
ATTENTION: For the connection of the CAN bus
it is recommended to use a shielded twisted
pair AWG24 cable.