-17-
Acquisition is controlled by XML entries:
•
AcquisitionStart
•
AcquisitionStop
•
AcquisitionMode
4.4
Frame Rate and Exposure
•
Camera Internal generator:
(
AcquisitionMode
= “Continuous”)
Frame rate:
In this mode, frame rate is defined by camera register and can be modified using camera
XML control interface.
Exposure:
In this mode, the exposure is defined by camera register and can be modified using
camera XML control interface.
•
External Synchronization generator:
(
AcquisitionMode
= “Single Frame”)
Frame rate:
In this mode, the frame rate is defined by the external TTL signal period. The allowed
frame rate range is the same as in Internal Synchronization.
Exposure:
In this mode, the exposure can be controlled by 2 different sources. The XML “Granularity”
feature allows you to select the control source:
o
Granularity
= “On”: Same as in the “Continuous” mode, camera register control
s the
exposure and can be modified using camera XML control interface.
o
Granularity
= “Off”: The exposure is controlled by the external T
TL signal pulse width.
•
Synchronization over CoaXPress by Frame Grabber:
(
AcquisitionMode
= “CoaxPress”)
Frame rate:
In this mode, the frame rate is defined by Frame Grabber “Trigger packets” period. The
allowed frame rate range is the same as in Internal Synchronization.
Exposure:
In this mode, the exposure can be controlled by 2 different sources. The XML
Granularity
feature allows you to select the control source:
o
Granularity
= “On”: Same as in the “Continuous” mode, camera register control
s the
exposure and can be modified using camera XML control interface.
o
Granularity
= “Off”: The exposure is controlled by the CoaXPress TTL signal pulse width.
Frame rate and exposure are controlled by XML entries:
•
AcquisitionFrameRate
•
ExposureTime
•
Granularity
