Electrical Installation
63
-
To enter the code press the
Up
and
Down
key (keep pressed) and then the
Mode
key. The display shows
HCODE
and then the 4 signs of the first block. With
Up
and
Down
each sign can be changed.
Mode
switches
to the next sign or next block.
Figure 19:
Sensing head
4.6 Exchange of the head cable
To avoid influences on the accuracy use an exchange cable with the same wire profiles and
specification like the original one.
The sensing head cable can also be exchanged if necessary.
Summary of Contents for CTlaser 05M
