Optos P200TxE User Manual Download Page 71

Page: 71 / 84

Chapter 8 - Technical Specification

9.1.3 Scan head dimensions

The scan head, hand control and touch screen should be placed on a table which meets the table
specification (see

on the next page). There should be adequate clearance around the

table to operate the device.

The image server, switch and any browser-based review clients or monitors must be positioned outside the
patient environment; more than 1.5 meters (5 ft) from the scan head.

TABLE 11: Scan head dimensions

Dimension

Details

Width

540 mm (22 inches)

Depth

570 mm (23 inches) including chin rest

Height

683 mm to 707 mm (27 inches to 28 inches)

Weight

45 kg (100 lbs) maximum

Door access width

760 mm (30 inches)

9.1.4 Review client properties

Browser-based review clients let you review and analyze patient images.

TABLE 12: Review client properties

Review clients

Display properties for browser-based review clients.

The minimum recommended monitor resolution.

1280 x 1024 pixels, 16.7 million colors.

Recommended browsers for Optos

Advance

Google Chrome (46.0 and higher)

Internet Explorer (11.0 and higher)

Apple Safari (6.0 and higher)

9.1.5 Touch screen properties

The touch screen is powered from the scan head at +12V.

WARNING

NOT

disconnect or connect the touch screen while the scan head is in use.

Part Number: G110230-003-ENG

Page 71 of 84

English

Summary of Contents for P200TxE
















































































Search results

Summary of Contents for P200TxE

Reviews:

Optos P200TxE, User Manual, Page: 71 / 84

Search results

Summary of Contents for P200TxE

Reviews: