Chapter 6 - Maintenance and cleaning
7.4 Battery replacement
CAUTION
Do
NOT
remove the scan head covers. Only Optos trained technical personnel are
permitted to service the device.
A 3V Lithium coin battery is embedded in the hardware for the device and does
NOT
require to be changed
by users. If there is a problem, please contact your Optos representative (see
7.5 Cable management
WARNING
Do
NOT
plug the scan head into a power block or powered table. The scan head must be
plugged directly into a wall socket.
To prevent electric shock:
l
Only use cables supplied by Optos.
l
Cables should
NOT
be extended or altered.
l
Mains supply must be earthed.
l
The device may only be serviced by Optos trained personnel.
l
Care must be taken never to touch exposed parts of the device while in physical
contact with a patient.
If the mains cable is damaged do not use the system and contact your Optos
representative (see
CAUTION
Ordinary equipment without protection against ingress of water.
You must regularly inspect the equipment. If there is any damage please contact your
Optos representative (see
The device is isolated from the mains by the main power cable and IEC connector. In an
emergency, the device should be isolated by unplugging from the mains power supply.
Ensure the mains socket is easily accessible.
Part Number: G110230-003-ENG
Page 63 of 84
Copyright 2019-2021, Optos plc. All rights reserved.
English