Optos P200T E Series User Manual Download Page 61

Page: 61 / 72

Chapter 4 - Technical Specification

The image server, switch and any browser-based review clients or monitors must be positioned outside the
patient environment; more than 1.5 meters (5 ft) from the scan head.

TABLE 10: Scan head dimensions

Dimension

Details

Width

540 mm (22 inches)

Depth

570 mm (23 inches) including chin rest

Height

683 mm to 707 mm (27 inches to 28 inches)

Weight

45 kg (100 lbs) maximum

Door access width

760 mm (30 inches)

4.1.4 Review client properties

Browser-based review clients let you review and analyze patient images.

TABLE 11: Review client properties

Review clients

Display properties for browser-based review clients.

The minimum recommended monitor resolution.

1280 x 1024 pixels, 16.7 million colors.

Recommended browsers for Optos

Advance

Google Chrome (46.0 and higher)

Internet Explorer (11.0 and higher)

Apple Safari (6.0 and higher)

4.1.5 Touch screen properties

The touch screen is powered from the scan head at +12V.

WARNING

Do not disconnect or connect the touch screen while the scan head is in use.

TABLE 12: Touch screen properties

Dimension

Details

Minimum display resolution

1024 x 768 pixels, 16.7 million colors

Width

281 mm (11 inches)

Depth

20 mm (1 inch)

Height

234 mm (9.5 inches)

Weight

less than 1.5 kg

Touch screen mount

VESA MIS-D, 75, C (hole pattern: 75 mm x 75 mm)

Part Number: G110230/1ENG

Page 61 of 72

English

Summary of Contents for P200T E Series






































































Search results

Summary of Contents for P200T E Series

Reviews:

Optos P200T E Series, User Manual, Page: 61 / 72

Search results

Summary of Contents for P200T E Series

Reviews: