Optos P200T E Series User Manual Download Page 43

Page: 43 / 72

Chapter 3 - How to...

3.2.8 How to capture OCT images

Depending on the features available on your device, you may be able to capture OCT images.

Select

OCT

and then select the OCT scan type.

FIGURE 13: OCT capture workflow

Use the following procedure for capturing OCT images. You should aim to optimize the scan, see

"How to

optimize OCT scan quality" on page 45

1. Select

OCT

to display the OCT scan types.

2. Select the required OCT scan type, see

Image modalities

on page 24.

3. Capture an SLO image if one has not already been captured, see

How to capture SLO images

page 39.

4. Adjust the scan position on the touch screen to the desired location.

5. Re-align the patient if required, see

How to align the patient

on page 37.

6. Select the live SLO image on the touch screen or press the top button on the hand control to set up the

OCT. The OCT set up auto-routines will run. Ask the patient to keep their eyes wide open at the start
of the auto-routines. During OCT set up the patient will see the alignment target, tracking scan, and
scan pattern, see

The patient's view of OCT alignment

on the next page.

7. Check the SNR, center, focus and location and adjust if necessary, see

Using the hand control

page 32. Check that the SNR is 8 or greater before capturing the scan.

8. Select the live SLO image on the touch screen or press the top button on the hand control to capture.

9. If required, select

Press to check OCT quality

to replay the scan.

Part Number: G110230/1ENG

Page 43 of 72

English

Summary of Contents for P200T E Series






































































Search results

Summary of Contents for P200T E Series

Reviews:

Optos P200T E Series, User Manual, Page: 43 / 72

Search results

Summary of Contents for P200T E Series

Reviews: