Optoma ZU920TST User Manual Download

Page: 23 / 89

English 23

SETUP AND INSTALLATION

Remote Setup

Install / Replacing Remote Control Batteries

Two AAA size batteries are supplied for the remote control.

Remove the battery cover on the back of the remote control.

Insert AAA batteries in the battery compartment as illustrated.

Replace back cover on remote control.

Note:

Replace only with the same or equivalent type batteries.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

Do not mix batteries of different types. Different types of batteries have different characteristics.

Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or
cause chemical leakage in old batteries.

Remove batteries as soon as the are depleted. Chemicals that leak from batteries that come in contact
with skin can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.

The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

If you will not be using the remote control for an extended period of time, remove the batteries.

When you dispose of the batteries, you must obey the law in the relative area or country.

Summary of Contents for ZU920TST


























































































Search results

Summary of Contents for ZU920TST

Reviews:

Related manuals for ZU920TST

Brands by name

Popular brands

Optoma ZU920TST, User Manual

Search results

Summary of Contents for ZU920TST

Reviews:

Related manuals for ZU920TST

Brands by name

Popular brands