Optoma ZU600SA, User Manual

Page: 32 / 65

English 32
USING THE PROJECTOR
Reset to Default
Select “Yes” to reset all the color matching adjustments to the factory defaults or select “No” to keep the current
values.
Advanced menu
White Peaking
Gamma
Color Temperature
Color Space
Color Settings
Color Enhancement
Film Mode
Extreme Black
PICTURE
OUTPUT
SETUP
OPTION
Advanced
100
VIdeo
Bright
Auto
0
On
On
White Peaking
(Video source only) Increase the brightness of whites that are near 100%.
Gamma
This allows you to set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma
adjustment steps to optimize your image output.
‡ Video : for video or TV source.
‡ Film : for home theater.
‡ Bright : for emphasizing brightness.
‡ CRT : for CRT monitor.
‡ DICOM : for simulated DICOM.
‡ Gamma 2.2 : for specific PC / photo source.
Color Temperature
Select a color temperature from Warmest, Warm, Cool, or Bright.
Color Space
S elect an appropriate color matrix type from RGB, REC709, REC601, RGB Video, or Auto.
Color Settings
Configure the brightness (gain) and contrast (offset) of an image.
‡ Red Gain / Green Gain / Blue Gain / Red Offset / Green Offset / Blue Offset : Adjust the gain of the red,
green, or blue channel of the image. Adjust the offset of the red, green, or blue channel of the image. It
will affect the black and white.
‡ Reset RGB Gain/Offset : Reset the gain and offset adjustments to the factory defaults.
Color Enhancement
Apply the color enhancement process.