background image

English

79

Appendices

Telnet Commands

 Port: support 3 ports of 23/1023/2023

 Multi-connections: Projector could receive commands from 

different ports at the same time

 Command Format: Follow RS232 command format (support 

both of ASCII and HEX)

 Command Response: Follow RS232 return message.

Lead 

Code

Projector 

ID

Command ID

Space

Variable

Carriage 

Return

~

n

CR

Fix code 

One 

Digit~

00

Defined by Optoma 

2 or 3 Digit. See the 

Follow content

One Digit

Per item 

Definition

Fix code 

One Digit

• 

For wide screen resolution (WXGA), the compatibility support is 

dependent on Notebook/PC models.

AMX Device Discovery commands

 DP : 239.255.250.250

 Port No. : 9131

 Each UDP broadcast information as below are updated around 

40 seconds

Command

Description

Remark (Parameter)

Device-UUID

MAC address (Hex value without’ 

‘:’ separator)

12 digits

Device-

SKDClass

The Duet DeviceSdk class name VideoProjector

Device-Make

Maker name

MakerPXLW

Device-Model

Model name

Projector

N

ote

N

ote

Summary of Contents for EH200st


























































































Reviews: